Powershell find details about server / workstations

We have been scoring the net in the quest for a powershell script so we can audit easily server specs , or workstation , both , or just a series of machines on a xls spreadsheet.

 

Here is the code. We arent claiming the glory for it ( Jesse Hamrick handy work quoted )

 

# ==============================================================================================
#
# Microsoft PowerShell Source File — Created with SAPIEN Technologies PrimalScript 2007
#
# NAME: Server/Workstation Inventory (CompInv_v2.ps1)
#
# AUTHOR: Jesse Hamrick
# DATE : 2/25/2009
# Web : www.PowerShellPro.com
# COMMENT: Script Inventories Computers and sends results to an excel file.
#
# ==============================================================================================

# ==============================================================================================
# Functions Section
# ==============================================================================================
# Function Name ‘WMILookup’ – Gathers info using WMI and places results in Excel
# ==============================================================================================
Function WMILookup {
foreach ($StrComputer in $colComputers){
$GenItems1 = gwmi Win32_ComputerSystem -Comp $StrComputer
$GenItems2 = gwmi Win32_OperatingSystem -Comp $StrComputer
$SysItems1 = gwmi Win32_BIOS -Comp $StrComputer
$SysItems2 = gwmi Win32_TimeZone -Comp $StrComputer
$SysItems3 = gwmi Win32_WmiSetting -Comp $StrComputer
$ProcItems1 = gwmi Win32_Processor -Comp $StrComputer
$MemItems1 = gwmi Win32_PhysicalMemory -Comp $StrComputer
$memItems2 = gwmi Win32_PhysicalMemoryArray -Comp $StrComputer
$DiskItems = gwmi Win32_LogicalDisk -Comp $StrComputer
$NetItems = gwmi Win32_NetworkAdapterConfiguration -Comp $StrComputer |`
where{$_.IPEnabled -eq “True”}

# Populate General Sheet(1) with information
foreach ($objItem in $GenItems1){
$Sheet1.Cells.Item($intRow, 1) = $StrComputer
Switch($objItem.DomainRole)
{
0{$Sheet1.Cells.Item($intRow, 2) = “Stand Alone Workstation”}
1{$Sheet1.Cells.Item($intRow, 2) = “Member Workstation”}
2{$Sheet1.Cells.Item($intRow, 2) = “Stand Alone Server”}
3{$Sheet1.Cells.Item($intRow, 2) = “Member Server”}
4{$Sheet1.Cells.Item($intRow, 2) = “Back-up Domain Controller”}
5{$Sheet1.Cells.Item($intRow, 2) = “Primary Domain Controller”}
default{“Undetermined”}
}
$Sheet1.Cells.Item($intRow, 3) = $objItem.Manufacturer
$Sheet1.Cells.Item($intRow, 4) = $objItem.Model
$Sheet1.Cells.Item($intRow, 5) = $objItem.SystemType
$Sheet1.Cells.Item($intRow, 6) = $objItem.NumberOfProcessors
$Sheet1.Cells.Item($intRow, 7) = $objItem.TotalPhysicalMemory / 1024 / 1024
}
foreach ($objItem in $GenItems2){
$Sheet1.Cells.Item($intRow, 8) = $objItem.Caption
$Sheet1.Cells.Item($intRow, 9) = $objItem.csdversion
}

#Populate Systems Sheet
foreach ($objItem in $SysItems1){
$Sheet2.Cells.Item($intRow, 1) = $StrComputer
$Sheet2.Cells.Item($intRow, 2) = $objItem.Name
$Sheet2.Cells.Item($intRow, 3) = $objItem.SMBIOSbiosVersion
$Sheet2.Cells.Item($intRow, 4) = $objItem.SerialNumber
}
foreach ($objItem in $SysItems2){
$Sheet2.Cells.Item($intRow, 5) = $objItem.Caption
}
foreach ($objItem in $SysItems3){
$Sheet2.Cells.Item($intRow, 6) = $objItem.BuildVersion
}

#Populate Processor Sheet
foreach ($objItem in $ProcItems1){
$Sheet3.Cells.Item($intRowCPU, 1) = $StrComputer
$Sheet3.Cells.Item($intRowCPU, 2) = $objItem.DeviceID+” “+$objItem.Name
$Sheet3.Cells.Item($intRowCPU, 3) = $objItem.Description
$Sheet3.Cells.Item($intRowCPU, 4) = $objItem.family
$Sheet3.Cells.Item($intRowCPU, 5) = $objItem.currentClockSpeed
$Sheet3.Cells.Item($intRowCPU, 6) = $objItem.l2cacheSize
$Sheet3.Cells.Item($intRowCPU, 7) = $objItem.UpgradeMethod
$Sheet3.Cells.Item($intRowCPU, 8) = $objItem.SocketDesignation
$intRowCPU = $intRowCPU + 1
}

#Populate Memory Sheet
$bankcounter = 1
foreach ($objItem in $memItems2){
$MemSlots = $objItem.MemoryDevices +1

foreach ($objItem in $MemItems1){
$Sheet4.Cells.Item($intRowMem, 1) = $StrComputer
$Sheet4.Cells.Item($intRowMem, 2) = “Bank ” +$bankcounter
if($objItem.BankLabel -eq “”){
$Sheet4.Cells.Item($intRowMem, 3) = $objItem.DeviceLocator}
Else{$Sheet4.Cells.Item($intRowMem, 3) = $objItem.BankLabel}
$Sheet4.Cells.Item($intRowMem, 4) = $objItem.Capacity/1024/1024
$Sheet4.Cells.Item($intRowMem, 5) = $objItem.FormFactor
$Sheet4.Cells.Item($intRowMem, 6) = $objItem.TypeDetail
$intRowMem = $intRowMem + 1
$bankcounter = $bankcounter + 1
}
while($bankcounter -lt $MemSlots)
{
$Sheet4.Cells.Item($intRowMem, 1) = $StrComputer
$Sheet4.Cells.Item($intRowMem, 2) = “Bank ” +$bankcounter
$Sheet4.Cells.Item($intRowMem, 3) = “is Empty”
$Sheet4.Cells.Item($intRowMem, 4) = “”
$Sheet4.Cells.Item($intRowMem, 5) = “”
$Sheet4.Cells.Item($intRowMem, 6) = “”
$intRowMem = $intRowMem + 1
$bankcounter = $bankcounter + 1
}
}

#Populate Disk Sheet
foreach ($objItem in $DiskItems){
$Sheet5.Cells.Item($intRowDisk, 1) = $StrComputer
Switch($objItem.DriveType)
{
2{$Sheet5.Cells.Item($intRowDisk, 2) = “Floppy”}
3{$Sheet5.Cells.Item($intRowDisk, 2) = “Fixed Disk”}
5{$Sheet5.Cells.Item($intRowDisk, 2) = “Removable Media”}
default{“Undetermined”}
}
$Sheet5.Cells.Item($intRowDisk, 3) = $objItem.DeviceID
$Sheet5.Cells.Item($intRowDisk, 4) = $objItem.Size/1024/1024
$Sheet5.Cells.Item($intRowDisk, 5) = $objItem.FreeSpace/1024/1024
$intRowDisk = $intRowDisk + 1
}

#Populate Network Sheet
foreach ($objItem in $NetItems){
$Sheet6.Cells.Item($intRowNet, 1) = $StrComputer
$Sheet6.Cells.Item($intRowNet, 2) = $objItem.Caption+” (enabled)”
$Sheet6.Cells.Item($intRowNet, 3) = $objItem.DHCPEnabled
$Sheet6.Cells.Item($intRowNet, 4) = $objItem.IPAddress
$Sheet6.Cells.Item($intRowNet, 5) = $objItem.IPSubnet
$Sheet6.Cells.Item($intRowNet, 6) = $objItem.DefaultIPGateway
$Sheet6.Cells.Item($intRowNet, 7) = $objItem.DNSServerSearchOrder
$Sheet6.Cells.Item($intRowNet, 8) = $objItem.FullDNSRegistrationEnabled
$Sheet6.Cells.Item($intRowNet, 9) = $objItem.WINSPrimaryServer
$Sheet6.Cells.Item($intRowNet, 10) = $objItem.WINSSecondaryServer
$Sheet6.Cells.Item($intRowNet, 11) = $objItem.WINSEnableLMHostsLookup
$intRowNet = $intRowNet + 1
}

$intRow = $intRow + 1
$intRowCPU = $intRowCPU + 1
$intRowMem = $intRowMem + 1
$intRowDisk = $intRowDisk + 1
$intRowNet = $intRowNet + 1
}
}

# ==============================================================================================
# Function Name ‘WMILookupCred’-Uses Alternative Credential-Gathers info using WMI.
# ==============================================================================================
Function WMILookupCred {
foreach ($StrComputer in $colComputers){
$GenItems1 = gwmi Win32_ComputerSystem -Comp $StrComputer -Credential $cred
$GenItems2 = gwmi Win32_OperatingSystem -Comp $StrComputer -Credential $cred
$SysItems1 = gwmi Win32_BIOS -Comp $StrComputer -Credential $cred
$SysItems2 = gwmi Win32_TimeZone -Comp $StrComputer -Credential $cred
$SysItems3 = gwmi Win32_WmiSetting -Comp $StrComputer -Credential $cred
$ProcItems1 = gwmi Win32_Processor -Comp $StrComputer -Credential $cred
$MemItems1 = gwmi Win32_PhysicalMemory -Comp $StrComputer -Credential $cred
$memItems2 = gwmi Win32_PhysicalMemoryArray -Comp $StrComputer -Credential $cred
$DiskItems = gwmi Win32_LogicalDisk -Comp $StrComputer -Credential $cred
$NetItems = gwmi Win32_NetworkAdapterConfiguration -Comp $StrComputer -Credential $cred |`
where{$_.IPEnabled -eq “True”}

# Populate General Sheet(1) with information
foreach ($objItem in $GenItems1){
$Sheet1.Cells.Item($intRow, 1) = $StrComputer
Switch($objItem.DomainRole)
{
0{$Sheet1.Cells.Item($intRow, 2) = “Stand Alone Workstation”}
1{$Sheet1.Cells.Item($intRow, 2) = “Member Workstation”}
2{$Sheet1.Cells.Item($intRow, 2) = “Stand Alone Server”}
3{$Sheet1.Cells.Item($intRow, 2) = “Member Server”}
4{$Sheet1.Cells.Item($intRow, 2) = “Back-up Domain Controller”}
5{$Sheet1.Cells.Item($intRow, 2) = “Primary Domain Controller”}
default{“Undetermined”}
}
$Sheet1.Cells.Item($intRow, 3) = $objItem.Manufacturer
$Sheet1.Cells.Item($intRow, 4) = $objItem.Model
$Sheet1.Cells.Item($intRow, 5) = $objItem.SystemType
$Sheet1.Cells.Item($intRow, 6) = $objItem.NumberOfProcessors
$Sheet1.Cells.Item($intRow, 7) = $objItem.TotalPhysicalMemory / 1024 / 1024
}
foreach ($objItem in $GenItems2){
$Sheet1.Cells.Item($intRow, 8) = $objItem.Caption
$Sheet1.Cells.Item($intRow, 9) = $objItem.csdversion
}

#Populate Systems Sheet
foreach ($objItem in $SysItems1){
$Sheet2.Cells.Item($intRow, 1) = $StrComputer
$Sheet2.Cells.Item($intRow, 2) = $objItem.Name
$Sheet2.Cells.Item($intRow, 3) = $objItem.SMBIOSbiosVersion
$Sheet2.Cells.Item($intRow, 4) = $objItem.SerialNumber
}
foreach ($objItem in $SysItems2){
$Sheet2.Cells.Item($intRow, 5) = $objItem.Caption
}
foreach ($objItem in $SysItems3){
$Sheet2.Cells.Item($intRow, 6) = $objItem.BuildVersion
}

#Populate Processor Sheet
foreach ($objItem in $ProcItems1){
$Sheet3.Cells.Item($intRowCPU, 1) = $StrComputer
$Sheet3.Cells.Item($intRowCPU, 2) = $objItem.DeviceID+” “+$objItem.Name
$Sheet3.Cells.Item($intRowCPU, 3) = $objItem.Description
$Sheet3.Cells.Item($intRowCPU, 4) = $objItem.family
$Sheet3.Cells.Item($intRowCPU, 5) = $objItem.currentClockSpeed
$Sheet3.Cells.Item($intRowCPU, 6) = $objItem.l2cacheSize
$Sheet3.Cells.Item($intRowCPU, 7) = $objItem.UpgradeMethod
$Sheet3.Cells.Item($intRowCPU, 8) = $objItem.SocketDesignation
$intRowCPU = $intRowCPU + 1
}

#Populate Memory Sheet
$bankcounter = 1
foreach ($objItem in $memItems2){
$MemSlots = $objItem.MemoryDevices +1

foreach ($objItem in $MemItems1){
$Sheet4.Cells.Item($intRowMem, 1) = $StrComputer
$Sheet4.Cells.Item($intRowMem, 2) = “Bank ” +$bankcounter
if($objItem.BankLabel -eq “”){
$Sheet4.Cells.Item($intRowMem, 3) = $objItem.DeviceLocator}
Else{$Sheet4.Cells.Item($intRowMem, 3) = $objItem.BankLabel}
$Sheet4.Cells.Item($intRowMem, 4) = $objItem.Capacity/1024/1024
$Sheet4.Cells.Item($intRowMem, 5) = $objItem.FormFactor
$Sheet4.Cells.Item($intRowMem, 6) = $objItem.TypeDetail
$intRowMem = $intRowMem + 1
$bankcounter = $bankcounter + 1
}
while($bankcounter -lt $MemSlots)
{
$Sheet4.Cells.Item($intRowMem, 1) = $StrComputer
$Sheet4.Cells.Item($intRowMem, 2) = “Bank ” +$bankcounter
$Sheet4.Cells.Item($intRowMem, 3) = “is Empty”
$Sheet4.Cells.Item($intRowMem, 4) = “”
$Sheet4.Cells.Item($intRowMem, 5) = “”
$Sheet4.Cells.Item($intRowMem, 6) = “”
$intRowMem = $intRowMem + 1
$bankcounter = $bankcounter + 1
}
}

#Populate Disk Sheet
foreach ($objItem in $DiskItems){
$Sheet5.Cells.Item($intRowDisk, 1) = $StrComputer
Switch($objItem.DriveType)
{
2{$Sheet5.Cells.Item($intRowDisk, 2) = “Floppy”}
3{$Sheet5.Cells.Item($intRowDisk, 2) = “Fixed Disk”}
5{$Sheet5.Cells.Item($intRowDisk, 2) = “Removable Media”}
default{“Undetermined”}
}
$Sheet5.Cells.Item($intRowDisk, 3) = $objItem.DeviceID
$Sheet5.Cells.Item($intRowDisk, 4) = $objItem.Size/1024/1024
$Sheet5.Cells.Item($intRowDisk, 5) = $objItem.FreeSpace/1024/1024
$intRowDisk = $intRowDisk + 1
}

#Populate Network Sheet
foreach ($objItem in $NetItems){
$Sheet6.Cells.Item($intRowNet, 1) = $StrComputer
$Sheet6.Cells.Item($intRowNet, 2) = $objItem.Caption+” (enabled)”
$Sheet6.Cells.Item($intRowNet, 3) = $objItem.DHCPEnabled
$Sheet6.Cells.Item($intRowNet, 4) = $objItem.IPAddress
$Sheet6.Cells.Item($intRowNet, 5) = $objItem.IPSubnet
$Sheet6.Cells.Item($intRowNet, 6) = $objItem.DefaultIPGateway
$Sheet6.Cells.Item($intRowNet, 7) = $objItem.DNSServerSearchOrder
$Sheet6.Cells.Item($intRowNet, 8) = $objItem.FullDNSRegistrationEnabled
$Sheet6.Cells.Item($intRowNet, 9) = $objItem.WINSPrimaryServer
$Sheet6.Cells.Item($intRowNet, 10) = $objItem.WINSSecondaryServer
$Sheet6.Cells.Item($intRowNet, 11) = $objItem.WINSEnableLMHostsLookup
$intRowNet = $intRowNet + 1
}

$intRow = $intRow + 1
$intRowCPU = $intRowCPU + 1
$intRowMem = $intRowMem + 1
$intRowDisk = $intRowDisk + 1
$intRowNet = $intRowNet + 1
}
}

# =============================================================================================
# Function Name ‘ListComputers’ – Enumerates ALL computer objects in AD
# ==============================================================================================
Function ListComputers {
$strCategory = “computer”

$objDomain = New-Object System.DirectoryServices.DirectoryEntry

$objSearcher = New-Object System.DirectoryServices.DirectorySearcher
$objSearcher.SearchRoot = $objDomain
$objSearcher.Filter = (“(objectCategory=$strCategory)”)

$colProplist = “name”
foreach ($i in $colPropList){$objSearcher.PropertiesToLoad.Add($i)}

$colResults = $objSearcher.FindAll()

foreach ($objResult in $colResults)
{$objComputer = $objResult.Properties; $objComputer.name}
}

# ==============================================================================================
# Function Name ‘ListServers’ – Enumerates ALL Servers objects in AD
# ==============================================================================================
Function ListServers {
$strCategory = “computer”
$strOS = “Windows*Server*”

$objDomain = New-Object System.DirectoryServices.DirectoryEntry

$objSearcher = New-Object System.DirectoryServices.DirectorySearcher
$objSearcher.SearchRoot = $objDomain
$objSearcher.Filter = (“(&(objectCategory=$strCategory)(OperatingSystem=$strOS))”)

$colProplist = “name”
foreach ($i in $colPropList){$objSearcher.PropertiesToLoad.Add($i)}

$colResults = $objSearcher.FindAll()

foreach ($objResult in $colResults)
{$objComputer = $objResult.Properties; $objComputer.name}
}

# ========================================================================
# Function Name ‘ListTextFile’ – Enumerates Computer Names in a text file
# Create a text file and enter the names of each computer. One computer
# name per line. Supply the path to the text file when prompted.
# ========================================================================
Function ListTextFile {
$strText = Read-Host “Enter the path for the text file”
$colComputers = Get-Content $strText
}

# ========================================================================
# Function Name ‘SingleEntry’ – Enumerates Computer from user input
# ========================================================================
Function ManualEntry {
$colComputers = Read-Host “Enter Computer Name or IP”
}

# ==============================================================================================
# Script Body
# ==============================================================================================
$erroractionpreference = “SilentlyContinue”
#Gather info from user.
Write-Host “********************************” -ForegroundColor Green
Write-Host “Computer Inventory Script” -ForegroundColor Green
Write-Host “By: Jesse Hamrick” -ForegroundColor Green
Write-Host “Created: 04/15/2009” -ForegroundColor Green
Write-Host “Contact: www.PowerShellPro.com” -ForegroundColor Green
Write-Host “********************************” -ForegroundColor Green
Write-Host ” ”
Write-Host “Admin rights are required to enumerate information.” -ForegroundColor Green
Write-Host “Would you like to use an alternative credential?” -ForegroundColor Green
$credResponse = Read-Host “[Y] Yes, [N] No”
If($CredResponse -eq “y”){$cred = Get-Credential DOMAINUSER}
Write-Host ” ”
Write-Host “Which computer resources would you like in the report?” -ForegroundColor Green
$strResponse = Read-Host “[1] All Domain Computers, [2] All Domain Servers, [3] Computer names from a File, [4] Choose a Computer manually”
If($strResponse -eq “1”){$colComputers = ListComputers | Sort-Object}
elseif($strResponse -eq “2”){$colComputers = ListServers | Sort-Object}
elseif($strResponse -eq “3”){. ListTextFile}
elseif($strResponse -eq “4”){. ManualEntry}
else{Write-Host “You did not supply a correct response, `
Please run script again.” -foregroundColor Red}
Write-Progress -Activity “Getting Inventory” -status “Running…” -id 1

#New Excel Application
$Excel = New-Object -Com Excel.Application
$Excel.visible = $True

# Create 6 worksheets
$Excel = $Excel.Workbooks.Add()
$Sheet = $Excel.Worksheets.Add()
$Sheet = $Excel.Worksheets.Add()
$Sheet = $Excel.Worksheets.Add()

# Assign each worksheet to a variable and
# name the worksheet.
$Sheet1 = $Excel.Worksheets.Item(1)
$Sheet2 = $Excel.WorkSheets.Item(2)
$Sheet3 = $Excel.WorkSheets.Item(3)
$Sheet4 = $Excel.WorkSheets.Item(4)
$Sheet5 = $Excel.WorkSheets.Item(5)
$Sheet6 = $Excel.WorkSheets.Item(6)
$Sheet1.Name = “General”
$Sheet2.Name = “System”
$Sheet3.Name = “Processor”
$Sheet4.Name = “Memory”
$Sheet5.Name = “Disk”
$Sheet6.Name = “Network”

#Create Heading for General Sheet
$Sheet1.Cells.Item(1,1) = “Device_Name”
$Sheet1.Cells.Item(1,2) = “Role”
$Sheet1.Cells.Item(1,3) = “HW_Make”
$Sheet1.Cells.Item(1,4) = “HW_Model”
$Sheet1.Cells.Item(1,5) = “HW_Type”
$Sheet1.Cells.Item(1,6) = “CPU_Count”
$Sheet1.Cells.Item(1,7) = “Memory_MB”
$Sheet1.Cells.Item(1,8) = “Operating_System”
$Sheet1.Cells.Item(1,9) = “SP_Level”

#Create Heading for System Sheet
$Sheet2.Cells.Item(1,1) = “Device_Name”
$Sheet2.Cells.Item(1,2) = “BIOS_Name”
$Sheet2.Cells.Item(1,3) = “BIOS_Version”
$Sheet2.Cells.Item(1,4) = “HW_Serial_#”
$Sheet2.Cells.Item(1,5) = “Time_Zone”
$Sheet2.Cells.Item(1,6) = “WMI_Version”

#Create Heading for Processor Sheet
$Sheet3.Cells.Item(1,1) = “Device_Name”
$Sheet3.Cells.Item(1,2) = “Processor(s)”
$Sheet3.Cells.Item(1,3) = “Type”
$Sheet3.Cells.Item(1,4) = “Family”
$Sheet3.Cells.Item(1,5) = “Speed_MHz”
$Sheet3.Cells.Item(1,6) = “Cache_Size_MB”
$Sheet3.Cells.Item(1,7) = “Interface”
$Sheet3.Cells.Item(1,8) = “#_of_Sockets”

#Create Heading for Memory Sheet
$Sheet4.Cells.Item(1,1) = “Device_Name”
$Sheet4.Cells.Item(1,2) = “Bank_#”
$Sheet4.Cells.Item(1,3) = “Label”
$Sheet4.Cells.Item(1,4) = “Capacity_MB”
$Sheet4.Cells.Item(1,5) = “Form”
$Sheet4.Cells.Item(1,6) = “Type”

#Create Heading for Disk Sheet
$Sheet5.Cells.Item(1,1) = “Device_Name”
$Sheet5.Cells.Item(1,2) = “Disk_Type”
$Sheet5.Cells.Item(1,3) = “Drive_Letter”
$Sheet5.Cells.Item(1,4) = “Capacity_MB”
$Sheet5.Cells.Item(1,5) = “Free_Space_MB”

#Create Heading for Network Sheet
$Sheet6.Cells.Item(1,1) = “Device_Name”
$Sheet6.Cells.Item(1,2) = “Network_Card”
$Sheet6.Cells.Item(1,3) = “DHCP_Enabled”
$Sheet6.Cells.Item(1,4) = “IP_Address”
$Sheet6.Cells.Item(1,5) = “Subnet_Mask”
$Sheet6.Cells.Item(1,6) = “Default_Gateway”
$Sheet6.Cells.Item(1,7) = “DNS_Servers”
$Sheet6.Cells.Item(1,8) = “DNS_Reg”
$Sheet6.Cells.Item(1,9) = “Primary_WINS”
$Sheet6.Cells.Item(1,10) = “Secondary_WINS”
$Sheet6.Cells.Item(1,11) = “WINS_Lookup”

$colSheets = ($Sheet1, $Sheet2, $Sheet3, $Sheet4, $Sheet5, $Sheet6)
foreach ($colorItem in $colSheets){
$intRow = 2
$intRowCPU = 2
$intRowMem = 2
$intRowDisk = 2
$intRowNet = 2
$WorkBook = $colorItem.UsedRange
$WorkBook.Interior.ColorIndex = 20
$WorkBook.Font.ColorIndex = 11
$WorkBook.Font.Bold = $True
}

If($credResponse -eq “y”){WMILookupCred}
Else{WMILookup}

#Auto Fit all sheets in the Workbook
foreach ($colorItem in $colSheets){
$WorkBook = $colorItem.UsedRange
$WorkBook.EntireColumn.AutoFit()
clear
}
Write-Host “*******************************” -ForegroundColor Green
Write-Host “The Report has been completed.” -ForeGroundColor Green
Write-Host “*******************************” -ForegroundColor Green
# ========================================================================
# END of Script
# ========================================================================